YASKAWA GA800 Series, Руководство по программированию

Страница: 396 / 644

2.8 H: Terminal Functions
396 YASKAWA TOEPYAIGA8002B GA800 Drive Programming
Figure 2.95 Speed Agree 2 Time Chart
■
14: User-Set Speed Agree 2
Setting Value Function Description
14 User-Set Speed Agree 2
The terminal activates when the output frequency is in the range of L4-03 [Speed Agree Detection Level (+/-)] ± L4-04 [Speed
Agree Detection Width (+/-)] and in the range of the frequency reference ± L4-04 .
Note:
•
The detection level set in L4-03 is a signed value. The drive will only detect in one direction.
•
The drive outputs the motor speed status when A1-02 = 3, 7 [Control Method Selection = CLV, CLV/PM] .
ON : The output frequency is in the range of “ L4-03
±
L4-04 ” and the range of frequency reference
±
L4-04 .
OFF : The output frequency is not in the range of “ L4-03
±
L4-04 ” or the range of frequency
reference
±
L4-04 .
Figure 2.96 Example of User-set Speed Agree 2 (L4-03 Is Positive)
■
15: Frequency Detection 3
Setting Value Function Description
15 Frequency Detection 3
The terminal deactivates when the output frequency is higher than the value of “ L4-03 [Speed Agree Detection Level (+/-)] + L4-04
[Speed Agree Detection Width (+/-)] ” . After the terminal deactivates, the terminal stays off until the output frequency is at the value
of L4-03 .
Note:
•
The detection level set in L4-03 is a signed value. The drive will only detect in one direction.
• The drive outputs the motor speed status when A1-02 = 3, 7 [Control Method Selection = CLV, CLV/PM] .
ON : The output frequency is less than the value of L4-03 or is not higher than the value of L4-03 +
L4-04 .
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV