12 Drive Control, Duty Modes, and Programming
YASKAWA ELECTRIC
TOEP C710617 17B YASKAWA AC Drive GA700 Initial Steps
EN 25
5.
Push
or
to select [C1 Accel & Decel Time], then push
.
6.
Push
or
to select
C1-01
, then push
.
7.
Push
or
to select the specified digit. Push
or
to select the correct number.
• Push
[Default] to set the parameters to the factory default.
• Push
[Min/Max] to move between the minimum value and maximum value.
8.
Push
to keep the changes.
9.
Continue to set parameters or push
[Back] to go back to the HOME screen.
12
Drive Control, Duty Modes, and Programming
◆
Drive Control Methods
This section gives information about these basic motor control methods:
•
V/f Control (V/f)
•
Open Loop Vector control (OLV)
•
EZ Vector Control for induction motors only (EZOLV)
Refer to the Technical Manual for information about speed feedback and Permanent Magnet/Synchronous
Reluctance motor control methods.
Use parameter
A1-02 [Control Method Selection]
to set the correct motor control method for the application.
EN
