3.2 Operating Procedures for Utility Functions
3.2.21 Display SERVOPACK and Servomotor IDs (Fn01E)
3-52
3.2.21
Display SERVOPACK and Servomotor
IDs (Fn01E)
You can use this utility function to display ID information on the SERVO-
PACK and on the Servomotor, encoder, and Option Module that are
connected to it. However, ID information for some Option Modules (e.g.,
the SGDV-OF01A) is not stored in the SERVOPACK.
Not Available
will
be displayed for these Option Modules.
You can use this utility function to display the following items.
*
If an Option Module is not connected,
Not connect
will be displayed after the Module
name.
ID Information
Displayed Items
SERVOPACK ID
Information
•
SERVOPACK model
•
SERVOPACK serial number
•
SERVOPACK manufacturing date
•
SERVOPACK input voltage
•
Maximum applicable motor capacity [W]
•
Maximum applicable rated motor current [Arms]
Motor ID Informa-
tion
•
Servomotor model
•
Servomotor serial number
•
Servomotor manufacturing date
•
Servomotor input voltage [V]
•
Servomotor capacity [W]
•
Rated motor current [Arms]
Encoder ID Informa-
tion
•
Encoder model
•
Servomotor serial number
•
Encoder manufacturing date
•
Encoder type/resolution
Safety Option Mod-
ule ID Information
*
•
Safety Option Module model
•
Safety Option Module serial number
•
Safety Option Module manufacturing date
•
Safety Option Module ID
Feedback Option
Module ID informa-
tion
*
•
Feedback Option Module model
•
Feedback Option Module serial number (reserved area)
•
Feedback Option Module manufacturing date
•
Feedback Option Module ID
