1-18
TERMINAL
FUNCTIONS
LEVELS
21
Multi-function analog monitor 1 (+) Output current
Type of analog signal (operation parameter) to be
22
Multi-function analog monitor (
–
)
or output
output is selected by setting of parameters
H4-01
frequency is
and
H4-04
.
23
Multi-function analog monitor 2 (+) selectable
Monitor output: 0 to +11V; 2 mA maximum
25
Multi-function open collector
One of 18 functions
Photocoupler insulation output: +48V, 50 mA
output 1
available, by setting
maximum
26
Multi-function open collector
of parameters
H2-02
output 2
and
H2-03
.
27
Multi-function open collector output common
0V
33
Frequency reference power supply
–
15V Control power supply for frequency setting:
max 20 mA
TERMINAL
FUNCTIONS
DESCRIPTION / SIGNAL LEVELS
NOTES:
1 .
When Forward Run and Reverse Run inputs are both closed for more than 500 ms, the Digital
Operator displays a blinking
“
EF
”
alarm code and the motor (if rotating) is decelerated by the
drive to a stop. This stop condition is not stored by the drive (on Digital Operator, red LED at
S T O P
key does not light);
I F O N E O F T H E I N P U T S I S O P E N E D , T H E M O T O R W I L L
I M M E D I A T E L Y S T A R T U P A G A I N .
2 .
Terminals 1-8 24 Vdc (8mA max.) and operate in a Low = True (ON) configuration when
connected to terminal 11.
When using relays for input to terminals 1-8, use relays with highly reliable contacts (for very
small current) with a capacity of 30 Vdc or more and rated current of 100mA or higher. When
using transistor (open collector) input, use transistors with rated voltage of 35 Vdc or more and
rated current of 100mA or more.
3 .
These terminals are multi-function inputs. The indicated functions are their settings, based on a
2-Wire reset. For 3-Wire reset definitions, and other settings, see descriptions for
“
Multi-
Function Input Terminals
”
, parameters
H 1 - 0 1
t h r u
H 1 - 0 6
, in paragraph 5.32.
Table 1-3. Terminal Functions and Signals of Control Circuit - Continued
Содержание CIMR-G5M
Страница 1: ...GPD 515 G5 Drive Technical Manual Models GPD515C and CIMR G5M Document Number TM 4515...
Страница 17: ...1 16...
Страница 20: ...1 19...