The 9-pin male SubD connector may be switched with BIOS. Here also the termination
resistor of the RS422 and RS485 interface may be activated or deactivated.
"Serial Port 2 Configuration"’ page 44
RS232 interface
n
Logical conditions as voltage level
n
Point-to-point connection with serial full-duplex transfer
n
Data transfer up to a distance of 15m
n
Data transfer rate up to 115.2kbit/s
RS422 interface
n
Logical conditions as voltage difference between 2 twisted lines
n
Serial bus connection full-duplex four-wire operation
n
Line length: 250m at 115.2kbit/s ... 1200m at 19.2kbit/s
n
Data transfer rate up to 115.2kbit/s
RS485 interface
n
Logical conditions as voltage difference between 2 twisted lines
n
Serial bus connection half-duplex two-wire operation
n
Line length: 250m at 115.2kbit/s ... 1200m at 19.2kbit/s
n
Data transfer rate up to 115.2kbit/s
RS232/RS422/RS485 inter-
face (switchable)
HMI
Hardware description
Structure > Interfaces
HB160 | PPC | 67S-RTP0 | en | 22-22
12
Содержание 67S-RTP0
Страница 1: ...PPC 67S RTP0 Manual HB160 PPC 67S RTP0 en 22 22 HMI Panel PC PPC021 IE...
Страница 13: ...HMI Hardware description Structure Interfaces HB160 PPC 67S RTP0 en 22 22 13...
Страница 71: ...Appendix HMI Appendix HB160 PPC 67S RTP0 en 22 22 71...
Страница 72: ...Content A History of changes 73 HMI Appendix HB160 PPC 67S RTP0 en 22 22 72...
