1 Introduction
1.1 About This Document
1-1
175932-1CD
175932-1CD
EcoTrim ET-1024 System
1
Introduction
1.1
About This Document
This manual is intended to provide a “first look” and overview of the
complete Motoman EcoTrim-1024 system. You should read and
understand this system manual before moving on to the more detailed
documentation that is included with your EcoTrim-1024 system. Although
basic in content, this manual is intended for personnel who have received
operator training from Motoman and are familiar with the operation of this
particular Motoman system. For more detailed information on any specific
component or peripheral, please review the full documentation package
that is included with the EcoTrim-1024 system (refer to
This system manual contains the following sections:
This chapter provides general information about the EcoTrim-1024
System and its components, a list of reference documents, and customer
service contact information.
chapter 2 "Equipment Description"
This chapter provides a description of the major components of the
EcoTrim-1024 System.
This chapter provides installation procedures for the EcoTrim-1024
System.
This chapter provides an overview of EcoTrim-1024 System operation,
including start-up, loading, normal operations, fault recovery, and system
shutdown.
This chapter provides a listing of preventive maintenance requirements for
certain components of the EcoTrim-1024 System.
chapter 6 "Anchor Requirements"
This chapter gives recommended anchoring hardware specifications and
foundation requirements for all the equipment that is part of the EcoTrim-
1024 System.
Appendix A provides a check sheet on what is included with the
documentation.
Appendix B provides pneumatic schematics for the EcoTrim ET-1024
System.
Appendix C provides optional and replacement parts for the EcoTrim ET-
1024 System.
12 of 64