![Yashica 44A Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/yashica/44a/44a_user-manual_3206043021.webp)
Yashica Twin Lens Reflex Guide - Focal Press January 1964
Page 21 / 55
Scans and Document copyright by Mischa Koning - www.3106.net
This document or parts thereof may not be sold and / or resold in either print form or
electronically without prior written consent from Mischa Koning
Unloading 35 mm. Film
After all exposures have been made the 35 mm. film has to be rewound into its cassette. To do this:
1.
Pull out the rewind release button "R" and give it a slight turn to keep it in this position.
2.
Rewind film by turning the protruding film spool locking knob on the base of the side wall of the camera (which
also carries the 35 mm. film wind knob) in a clockwise direction until all film is rewound into the cassette.
3.
Open camera back and remove cassette by pulling out film spool locking knob, close camera. Make certain to
remove and retain the auxiliary supporter shaft (stepped rod) from the cassette. You need it for the next and all
future cassettes you load into the camera,
Shooting with 35 mm. Film
1.
Advance the film to the next frame by pressing the 35 mm. film release button and turn the 35 mm. winding knob
as far as it will go.
2.
Set shutter speed and aperture and cock shutter as described for shooting with roll film. (steps 2 and 3)
3.
Focus and determine picture area. The picture area for 35 mm. film is indicated on the reflex screen by the red
lines. The image at infinity to 10 ft. is represented by the rectangle without the lower strip, at 3.5 ft. by that
without the upper strip but including the lower one, at distances between 10 and 3.5 ft. appropriate between
settings.
Where using the eye-level frame finder, attach the frame finder mask provided with the conversion kit into the
2¼ x 2¼ frame to reduce the field of view to correspond with the 35 mm. size.
4.
Release the shutter.
USING 35 mm. FILMS
Above: The 35 mm. conversion unit for Model 635. 1. auxiliary spool assembly; 2. sprocket; 3. pressure plate
aligning hole; 4. converter mask assembly; 5. film pressure plate; 6. 35 mm. film; 7. auxiliary supporter shaft; 8. film
cassette; 9. metal adapter ring.