Yardworks CGT48BCU.9, Инструкция по эксплуатации

Страница: 16 / 26

model no.
060-3097-8
| contact us: 1.866.523.5218
16
Operation Instructions
Note: Remove battery prior to replacing spool and line.
5. TO REPLACE THE SPOOL AND LINE
For your convenience, it is recommended you buy a replacement spool with line.
Press and hold in the two cap release latches. Rotate and loosen the cap by rotating it
counter-clockwise. Pull cap away from the spool holder. (See Fig. J1)
Remove old spool. (See Fig. J2)
Place new spool into cutting head. Release one line from cleat and feed line through eyelet.
(See Fig. J3)
Replace the cap on the spool holder and turn the cap clockwise to tighten. (See Fig. J4)
NOTE: If required, line can be fed out manually. Gently pull out the 2 lines out until the lines
reach the line cutter. If the line extends past the line cutter, too much line has been fed out. If
too much line is fed out, remove the spool cap and click spool counter-clockwise until the line
is at the desired length.
A2 A1
C2 C1
B
E1
E2
G F
H2 H1
H4 H3
J1
I
J3 J2
K2
J4
K1
LOW
High
1
2
1
2
1
2
14
15
30 0
1
2
3
2
1
A2
A1
C2 C1
B
E1
E2
G F
H2 H1
H4 H3
J1 I
J3 J2
K2
J4
K1
LOW
High
1
2
1
2
1
2
14
15
30 0
1
2
3
2
1