9
Installing and removing the battery
Fig. 1
1
2
3
IMPORTANT!
To Remove
1. Press in and hold the latch buttons
(1)
on both sides of
the battery pack.
2. Grasp the trigger handle
(2)
firmly. Pull the battery
pack out of the handle.
NOTE:
The battery pack fits snugly into the handle to
prevent accidental dislodging. It may require a strong pull
to remove.
To Install
1. Align the tongue
(3)
of the battery pack with the cavity in
the handle housing.
2. Grasp the trigger handle
(2)
firmly.
3. Push the battery pack into the handle until both sides lock.
The latch buttons will click when they lock.
4. Do not use force when inserting the battery pack. It should
slide into place and click.
ASSEMBLY INSTRUCTIONS
The battery pack is not charged when it is purchased. Before using the trimmer for the first time, charge
the battery. See Charging Procedure (Fig. 4) for further instructions.
