model no. 60-2293-6 | contact us: 1.866.523.5218
20
Maintenance
CHARGER MAINTENANCE
•
Keep the charger clean and clear of debris. do not allow foreign material into the recessed
cavity or on the contacts. Wipe with a dry cloth. do not use solvents, water, or place in wet
conditions.
•
Always unplug the charger when there is no battery pack in it.
•
Give the batteries a full charge before placing in storage. do not recharge a fully charged
battery pack. overcharging shortens the battery life.
•
Check that the charger contacts have not been shorted by debris or foreign material.
•
if the surrounding air temperature is not normal room temperature, move the charger and
battery pack to a location where the temperature is between 14 and 113˚F (-10 and 45˚C).
BATTERY PACK
•
Store the battery pack fully charged.
•
Recharge the battery pack any time you notice there is less power. never let the battery
pack become completely discharged.
•
never recharge a battery pack that is already fully charged. overcharging shortens the
battery life.
•
Always recharge at a temperature of 14 to 113˚F (-10 to 45˚C). if the battery pack is hot, let
it cool down before recharging.
•
After charging, the battery pack may be stored in the charger as long as the charger is not
plugged in.
CUTTING LINE
•
Replace the cutting line only with nylon monofilament .065’’ (1.65 mm) line, or with prewound
replacement spools.
•
Always wind the line in the same direction as the arrow on the spool.
