Yardworks 60-1752-0, Руководство оператора

Страница: 9 / 19

STARTING THE MOWER
SAFETY KEY:
TO START THE MOWER:
CUTTING HEIGHT ADJUSTMENT
1
LOW
HIGH
Safety key
Safety key
Storage Operating In order to prevent accidental start-up or unauthorized use of the
battery-operated mower, a removable safety key has been
incorporated into the design of the mower. The mower is
completely disabled when the safety key is removed from the
mower.
NOTE: THE SAFETY KEY HAS A HOLE THROUGH THE
CENTRE THAT ALLOWS FOR STORAGE ON A HOOK, OUT
OF THE REACH OF CHILDREN.
CAUTION: ALWAYS REMOVE THE SAFETY KEY FROM THE
MOWER WHEN THE MOWER IS LEFT UNATTENDED.
1. Insert the
safety key.
2. Push the safety
tab out in order to
expose the lever.
3. Pull the lever up
in order to
start the mower.
4. To stop the mower, release
the lever, and then remove
the safety key.
Carefully follow the illustration below, in order, when starting the mower.
CAUTION:
Do not attempt to override the operation of the safety key or lever.
WARNING:
The operation of any mower can result in foreign objects being thrown into the eyes, which
can cause severe eye damage. Always wear safety glasses while operating the mower and while performing
any adjustments or repairs.
WARNING:
Ensure that other people and pets remain at least 100' (30 m) away when the mower is in use.
INSPECT THE CUTTING AREA
Remove all stones, sticks, wire, bones, and other debris that might be thrown by the rotating blades.
A single height adjustment lever is used to adjust the cutting
height. The lever is located beside the right rear wheel, and has
six ( 6 ) height positions, ranging from 1 5 / 8 to 4" ( 4.1 to 10. 2 cm).
Before making any adjustments, release the switch to turn the
mower off, wait for blade to come to a complete stop, and remove
the safety key.
Simply move the lever (1) toward the wheel and then place it in
the desired position. This will set all of the wheels to the same
height.To raise the height, release the height adjustment lever
from its current position, and pull it toward the back of the mower.
To lower the height, release the height adjustment lever from its
current position, and push it toward the front of the mower.
9