Yardworks 274-1754-8 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 34

Yardworks 274-1754-8 Скачать руководство пользователя страница 18

model no. 274-1754-8 | contact us: 1.866.523.5218

model no. 274-1754-8 | contact us: 1.866.523.5218

18

!

!

STARTING AND STOPPING

• Press the safety lock button. Squeeze the trigger switch to start.

• Release the trigger switch to stop.

ADJUSTING POLE SAW HEIGHT

• Rotate the collar counter-clockwise to loosen.

• Remove power head pole from extension pole by pulling up on it.

• Rotate the second collar counter-clockwise to loosen.

• Remove the extension pole from the handle pole by pulling it up.

• Rotate collar clockwise to tighten.

NOTE: To lock out the trigger, you can pull back the

safety lock with your thumb. To unlock the safety lock,

push it forward. When the pole saw is not in use, you

can use the safety lock to prevent activation during

storage or transport.

NOTE:

• Adjust your hand placement on the shaft of the pole saw

to keep proper balance.

• Assemble poles only to the length required to reach

the limb being cut. Do not extend the handle above waist

height.

Switch lock

Switch trigger

Collar

TRANSPORTING THE POLE SAW

• Always switch off the power tool, remove the battery and fit the chain scabbard - even

when you carry the unit for short distances. This avoids the risk of the motor starting

unintentionally.

Oper

ating Instructions

«
...
16
17
18
19
20
...
»

Содержание 274-1754-8



































Отзывы:

Нет отзывов