model no. 060-3808-8 | contact us: 1-866-523-5218
20
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage
from various types of commercial solvents and may be damaged by their use. Use clean
cloths to remove dirt, dust, oil, grease, etc.
Stop the motor and unplug the edger whenever you are not using the tool. Unplug the
edger and allow sufficient time for the blade to stop rotating before before unclogging the
blade guard or when making a repair, adjustment, inspection, etc.
Keep all nuts, bolts, and screws tight.
You can make the adjustments and repairs described here on a regular basis. For other
repairs, have the product serviced by an authorized service dealer.
!
petroleum-based products, penetrating oils, etc., come in
contact with plastic parts. Chemicals can damage, weaken,
or destroy plastic, which may result in serious personal
injury.
!
WARNING: Do not attempt to sharpen blade. Failure to
heed this warning could result in serious personal injury or
property damage
!
WARNING: Before inspecting, cleaning or servicing the
unit, stop the motor, wait for all moving parts to stop,
and disconnect from the power supply. Failure to follow
these instructions can result in serious personal injury or
property damage.
!
WARNING: When servicing, use only identical replacement
parts. Use of any other parts may create a hazard or cause
product damage.
!
WARNING: Always wear safety goggles or safety glasses
with side shields during power tool operation or when
blowing dust. If operation is dusty, also wear a dust mask.
Maintenance
WARNING: Do not, at any time, let brake fluids, gasoline,
