model no. 060-3772-0 | contact us 1.866.523.5218
model no. 060-3772-0 | contact us 1.866.523.5218
19
WARNING! Do not crouch on the ground, sit down on a log beside the
splitter, or kneel down by the log splitter (fig. 5). Always keep your
hands and body out of the splitting or operating zone while using the
log splitter.
WARNING! After 5 seconds, the pressurized oil becomes overheated
and could damage the motor. Never keep pressure on the wood by
trying to force the log splitter for more than 5 seconds. If the log
is extremely hard, rotate the log 90° and try to split it in a different
direction. If this doesn’t work, it means that the hardness of the log
exceeds the capacity of the log splitter therefore, the log should be
discarded. Do not force the log splitter to split very hard wood.
Oper
ation
5
6
NOTE: Both hands are required to start the log splitter.
Simultaneously holding the switch with your right hand and
pushing the hydraulic control lever to the right with your left hand
starts the ram (log pusher) which pushes the log into the wedge.
If either hand is removed from either one of the controls, the log
splitter will automatically return to the starting position.
d. Using your right hand, push and hold down the pushbutton switch (fig. 6).
e. While holding down the switch, push the hydraulic control lever to the right (fig. 6).
Push the lever halfway (setting I) when splitting softwood.
Push the lever all the way to the right (setting II) when splitting hardwood.
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 19
2017/3/6 22:26:45
