model no. 060-3714-0 | contact us: 1.866.523.5218
REPLACING THE SCRAPER
The scraper is located at the bottom of the impeller housing.
•
Ensure that the snowthrower is not plugged in.
•
Remove the screw (1) from each side plate that holds the scraper and 3 screws (2) from
under the machine that secure the scraper to the machine.
•
Remove and discard the old scraper.
•
Install the new scraper, and fasten it securely with the screws that you previously
removed.
WARNING: If the extension cord is plugged into the
snowthrower, the snowthrower could start accidentally
while the operator is performing maintenance on it, which
could cause serious personal injury. Disconnect the
extension cord before performing any maintenance.
!
2
1
1
Maintenance
21
