Yardworks 060-3097-8, Инструкция по эксплуатации

Страница: 12 / 26

model no.
060-3097-8
| contact us: 1.866.523.5218 model no.
060-3097-8
| contact us: 1.866.523.5218
12
3. ASSEMBLING THE SAFETY GUARD
Attach the safety guard to the trimmer head. Align the guard so it slides into the slots located on the
trimmer head. (See Fig. C1)
Secure the safety guard onto the trimmer head with the bolts provided by using hex key. (See Fig. C2)
BEFORE OPERATION
1. CHARGING THE BATTERY PACK
IMPORTANT NOTES FOR CHARGING BATTERY
The battery (not included) in your new tool is not charged when it leaves the plant.
Therefore, it must be fully charged before using the first time.
NOTE: If the battery pack is very hot you must remove your battery pack from the charger
and allow your battery pack to cool first to ambient temperature and then recharging can be
started.
To prevent damage to the battery pack, when charge runs out, please charge the battery to
reach full or no less than half charge before storage.
If the tool will not be used for long periods of time, charge the battery every 3-6 months.
CHARGING PROCEDURE (SEE FIG. D )
1) Plug the charger (not included) into an appropriate outlet.
2) Slide the battery pack into the charger; the light will begin flashing green to indicate the
charging process has started.
3) When charging is completed, the light will turn solid green. The pack is now fully
charged; unplug the charger and remove the battery pack.
WARNING:
When battery charge runs out after continuous use or exposure to
direct sunlight or heat, allow time for the tool to cool down before re-charging
to achieve the full charge.
WARNING! Take great care when doing this as the guard has a very
sharp line cutter.
WARNING! Never operate the tool without the guard properly in place.
Use of the unit without having installed the guard may result in injury.
Operation
A2 A1
C2 C1
B
E1
E2
G F
H2
H1
H4 H3
J1 I
J3 J2
K2
J4
K1
LOW
High
1
2
1
2
1
2
14
15
30 0
1
2
3
2
1