model no. 060-2374-4 | contact us: 1.866.523.5218
model no. 060-2374-4 | contact us: 1.866.523.5218
17
To remove the battery pack
• Press and hold the latch button (1) add with a firm grip.
• Grasp the trigger handle (2) firmly. Pull the battery pack out of the handle.
To install the battery pack
• Align the tongue (3) of the battery pack with the cavity in the handle housing.
• Insert the battery into the battery opening until the battery release button locks into place.
• Grasp the trigger handle (2) firmly.
• Push the battery pack into the handle until both sides lock. The latch button will click when
locked into place.
• Do not use force when inserting the battery pack. It should slide into place and click.
Follow these instructions in order to avoid injury and to reduce the risk of
electric shock or fire: Replace the battery pack or the charger immediately
if the battery case or charger cord is damaged. Verify that the switch is in
the OFF position before inserting or removing the battery pack. Verify that
the battery pack is removed and the switch is in the OFF position before
inspecting, adjusting, or performing maintenance on any part of the blower.
Read, understand, and follow the instructions contained in the section
entitled Charging Procedure.
IMPORTANT! The battery pack is not charged when it is purchased. Before
using the blower for the first time, place the battery pack in the battery
charger. Make sure to read all safety precautions, and follow the instructions
in the Battery Charger section.
NOTE: The battery pack fits into the handle snugly in order to prevent
accidental dislodging. It may require a strong pull to remove it.
!
!
!
1
2
3
1
2
3
A
ssembl
y
