model no. 060-2359-2 | contact us: 1.866.523.5218
model no. 060-2359-2 | contact us: 1.866.523.5218
11
A
ssembl
y
BATTeRY
To remove the battery:
1.
Slide the latch button on the battery pack
down (3) and hold.
2.
grasp the trigger handle (2) firmly. Pull the
battery pack out of the handle.
To install the battery:
1.
Align the tongue (1) of the battery pack with
the cavity in the handle housing.
2.
grasp the trigger handle (2) firmly.
3.
Push the battery pack into the handle until
the latch locks into place.
!
IMPORTANT: The battery pack is not charged when it is
purchased. Before using the hedger for the first time,
place the battery pack in the battery charger and charge.
Make sure to read all safety precautions, and follow the
instructions on page 14 for charging the battery.
!
NOTe: The battery pack fits snugly into the handle to
prevent accidental dislodging. It may require a strong
pull to remove.
!
IMPORTANT: dO NOT remove the blade assembly. If the
blade needs sharpening, straightening, or replacing take
it to an authorized repair centre.
1
2
3
!
WARNINg: Follow these instructions in order to avoid
injury and to reduce the risk of electric shock or fire:
•
Replace the battery pack or the charger immediately if
the battery case or charger cord is damaged.
•
Verify that the switch is in the OFF position before
inserting or removing the battery pack.
•
Verify that the battery pack is removed and the switch
is in the OFF position before inspecting, adjusting, or
performing maintenance on any part of the hedger.
•
Read, understand, and follow the instructions on page
14 for charging the battery.
