Yardworks 060-1983-0, Инструкция по эксплуатации

Страница: 36 / 50

model no. CBV48CU | contact us: 1.866.523.5218
12
A2 A1
B1 B2
C2
C1
D
E2 E1
F
+
-
1
1
2
2
II
I
Assembly
NOTE:
Before using the tool, read the instruction book carefully.
ASSEMBLY
1. ASSEMBLING AND REMOVING THE BLOWER TUBE (SEE FIG. A1)
- ASSEMBLING
Before assembling the blower tube, be sure the on/off switch is in “O’’ Off position.
Insert the blower tube directly to the motor housing as shown in Fig. A1. Be sure to align
the tube release button with the buckle on the motor housing. Check to see if the blower
tube is firmly secured.
- REMOVING (SEE FIG. A2)
Before disassembling the blower tube, be sure the on/off switch is in “O’’ Off position.
Press the tube release button, so you can separate the tube. Pull the blower tube out from
the motor housing. Do not try to separate the tubes by force or by using tools.
WARNING! Do not attempt to assemble or remove the tube by any
means other than stated.
WARNING: Remove the battery pack before any work on the tool.