Yardworks 060-1979-2, Инструкция по эксплуатации

Страница: 15 / 24

model no.
060-1979-2
| contact us: 1.866.523.5218
Operating Instructions
)085064&:063)&%(&53*..&3
Inspect the area to be cut before each use, remove objects which can be thrown or
become entangled in the cutting blades.
Always hold the hedge trimmer with both hands and with the blade away from you
before turning it on.
When trimming new growth, use a wide sweeping action so that the stems are fed
directly into the blade.
Allow the cutting blades to reach full speed before entering the material to be cut.
Always work in the direction going away from people and solid objects such as walls,
large stones, trees, vehicles etc.
If the blade stalls, immediately stop the hedge trimmer. Remove the battery pack and
clear the jammed debris from the cutting blade.
Wear gloves when trimming thorny or prickly growth.
Move the hedge trimmer to feed the branches directly into the blade cutting edges.
Do not try to cut stems that are too large to feed into the cutting blade.
*.1035"/55*14'0353*..*/()&%(&4
• Assume secure posture and hold trimmer with both hands. If using a stepladder,
ensure it is secured and if working at a high level, tie the ladder to the thicker, inner
branches of the hedge.
• Ensure no people or animals are in or near the work area.
501$655*/( 4&&'*('
Use a wide sweeping motion. A slight downward tilt of the cutting blades in the direction
of motion gives the best cutting results.
E1
E2
0°
45°
90°
135°
180°