Yardworks 060-1753-8, Руководство пользователя

Страница: 15 / 23

MOWING TIPS
15
MULCHING TIPS
NOTE: A sharp blade will greatly enhance the performance of the mower, especially when cutting
high grass. Be sure to check the blade and to sharpen it at least once per year, as described in
the Maintenance section.
Verify that the lawn is free of stones, sticks, wires, and other objects that could damage the blades
or the motor. These objects could be accidentally thrown by the mower in any direction, and could
cause serious personal injury to the operator and to others.
In order to prevent electric shock, do not operate the mower in damp or wet conditions.
Do not mow in circles. Travel back and forth across the lawn.
When cutting thick grass, reduce walking speed in order to allow for a more effective cut and a
proper discharge of the clippings.
For a healthy lawn, always cut off one-third or less of the total length of the grass. The average
lawn should be approximately 1 1/2 to 2” (3.8 to 5 cm) long during cool months, and more than 2”
(5 cm) long during hot months. If there is growth, the lawn should be cut in the fall.
NOTE: INSPECT THE AREA WHERE THE MOWER IS TO BE USED, AND REMOVE ALL
STONES, STICKS, WIRE, BONES, AND OTHER DEBRIS THAT MIGHT BE THROWN BY THE
ROTATING BLADE.
1. Release the switch to turn the mower OFF when crossing any graveled area (stones can be
thrown by the blade).
2. Set mower to the highest cutting height when mowing on uneven ground or in tall weeds.
3. For effective mulching, do not cut wet grass, because it tends to stick to the underside of the
deck, preventing proper mulching of grass clippings. New or thick grass may require a narrower
cut. The ground speed should be adjusted to the condition of the lawn. If mowing has been
delayed and the grass has been allowed to grow longer than 4" (10 cm), mow the lawn twice in
order to reduce the grass height to a maximum of 3 1/4” (8.3 cm).
4. Walk at a steady pace. Overlap the cutting rows. Do not let the grass get too tall. If the grass
gets too long, start at the highest cutting position and work down to the desired cutting height.
OPERATION
WARNING: If you strike a foreign object, stop the motor and disconnect the power cord.
Thoroughly inspect the mower for any damage. Repair any damage before operating the
mower. Excessive vibration of the mower during operation is an indication of damage.
Thoroughly inspect the mower and repair any damage before operating the mower.