Yardworks 060-1700-4 Скачать руководство пользователя страница 17

model no. 060-1700-4  |  contact us: 1-866-523-5218

17

READ ALL INSTRUCTIONS

• 

This cutting machine is capable of 
severing (amputating refers to the 
surgery) hands and feet and throwing 
objects. Failure to observe all safety 
instructions could result in serious injury 
or death.

• 

Do not use the lawn mower in damp or 
wet conditions or operate in the rain.

• 

Never allow adults to operate the 
product without proper instruction.

• 

Keep the area clear of all bystanders, 
children, and pets while mowing. Stop 
machine if anyone enters the area.

• 

Tragic accidents can occur if the 
operator is not alert to the presence of 
children. Children are often attracted to 
the machine and the mowing activity. 
Never assume that children will remain 
where you last saw them.

• 

Keep children out of the mowing 
area and under the watchful care of 
a responsible adult other than the 
operator.

• 

Be alert and turn mower off if a child 
enters the area.

• 

Never allow children to operate the 
machine.

• 

Use extra carewhen approaching blind 
corners, shrubs, trees, or other objects 
that may block your view of a child.

• 

Do not wear loose clothing or jewelry. 
They can be caught in moving parts. 
Use of rubber gloves and footwear is 
recommended when working outdoors.

• 

Keep firm footing and balance. Do not 
overreach. Overreaching can result in 
loss of balance.

• 

Do not operate the equipment while 
barefoot or when wearing sandals 
or similar lightweight footwear. Wear 
protective footwear that will protect 
your feet and improve your footing on 
slippery surfaces.

• 

Do not leave the mower unattended 
while running.

• 

Keep hands and feet away from cutting 
area.

• 

Operate the lawn mower only in 
daylight or good artificial light.

• 

Always wear safety glasses with side 
shields. Everyday glasses have only 
impact resistant lenses. They are NOT 
safety glasses. Following this rule will 
reduce the risk of eye injury. Use face 
mask if operation is dusty.

• 

Wear safety glasses or goggles that 
aremarked to comply with ANSI Z87.1 
standard when operating this product.

• 

Use the right appliance. Do not use the 
lawn mower for any job except that for 
which it is intended.

• 

Do not force the lawn mower. It will do 
the job better and safer at the rate for 
which it was designed.

• 

Stay alert, watch what you are doing, 
and use common sense when operating 
the lawn mower. Do not operate the 
mower while tired or under the influence 
of drugs, alcohol, or medication. A 
moment of inattention while operating 
the lawn mower may result in serious 
personal injury.

• 

Keep machine in good working 
condition. Keep blades sharp and 
guards in place and in working order.

• 

Check all nuts, bolts, and screws at 
frequent intervals for proper tightness 
to be sure the equipment is in safe 
working condition.

• 

Stop the motor and wait until the blade 
comes to a complete stop before 
cleaning the lawn mower, removing 
the grass catcher, or unclogging the 
discharge guard.

• 

When not in use, mower should be 
stored indoors in a dry, locked up 
place—out of the reach of children.

• 

To reduce the risk of electric shock, 
this product has a polarized plug (one 
blade is wider than the other) and will 
require the use of a polarized extension 
cord. The plug will fit into a polarized 
extension cord only one way, if the 
plug does not fit fully into the extension 
cord, reverse the plug. If the plug still 

Important Safety Instructions

Содержание 060-1700-4
























Отзывы: