model number 060-0570-8 | contact us: 1.866.523.5218
10
Operation
ON/OFF SWITCH
Press Action
Function
Long Press - ON
(Press and hold on for 2 seconds)
The inverter starts. The two USB ports, one type C
port, and one AC port begin to work.
Second Press
The LED sweep (2) is on, and the LED light (5) is
off.
Third Press
The LED light (5) is on, and the LED sweep (2) is
off.
Fourth Press
The LED light (5) is on, and the LED sweep (2) is
on.
Long Press
(Press and hold on for 2 seconds )
The inverter is off.
NOTE:
The first 4 steps make a cycle, and any one of the steps should be carried out
according to this cycle.
OPERATION PROCEDURE (SEE FIG. A)
NOTE:
•
The inverter is equipped with two USB ports (6), one type C port (7) and one AC port (4).
•
The two USB ports (6) supply a maximum of 5 V DC, up to 3.0 A output seprately to
power small USB devices, like your cell phone, small fan, etc.
•
The type C port (7) supplies a maximum of 5 V DC, up to 3.0 A output to power small
type C devices, like your cell phone, tablet, etc.
•
The AC port (4) supplies a 120 V AC, max.150 W output to power the small AC devices,
such as a laptop computer.
•
The product may not supply power to some USB devices.
LED LIGHT
The LED light (2) increases visibility for dark or enclosed areas.
To turn on the LED (2) light, press the on/off switch (1) for a third time, and the LED light will
be on with 100% brightness. Press the on/off switch (1) again (the fourth time), and the LED
light will get dimmer with 50% brightness.
WARNING: Do not stare at the light directly when it is working, or
your eyes may be hurt.
WARNING: Do not allow familiarity with this product to make
you careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING: Do not modify or attempt to repair the power inverter
except as indicated in the instructions for use and care.
WARNING: Do not insert a nail, wire, etc. into the AC power
supply port, or the risk of electric shock may occur.
