Yardworks 054-5703-0, Инструкция по эксплуатации

Страница: 38 / 43

Model No. 054-5703-0 | $ ontact us: 1-866-523-5218
38
Electrical
GUIDELINES FOR USING EXTENSION CORDS
USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good
condition. When using an extension cord, be sure to use one of heavy enough gauge to carry
the current your product will draw. An undersized cord will cause overheating. The table
below shows the correct size to use depending on cord length and amperage ampere rating.
If in doubt, use the next heavier gauge.The smaller the gauge number, the heavier the cord.
Make sure your extension cord is properly wired and in good electrical condition. Always
replace a damaged extension cord, or have it repaired by a qualified person before using it.
Keep your extension cords away from sharp objects, excessive heat and damp or wet areas.
Use a separate electrical circuit for your tools. This circuit should not be less than #12 wire, and
should be protected with a 15 A time-delayed fuse. Before connecting the motor to the power
line, make sure the switch is in the OFF position and the electric current is rated the same as
the current stamped on the motor nameplate. Running at a lower voltage will damage the
motor.
Minimum Gauge for Extension Cords (AWG)
(when using 120 V only)
Amperage Total Length of Cord in Feet (meters)
More Than Not More Than 25' (7.6 m) 50' (15 m)
Not Recommended
0
6
10
12
6
10
12
16
18
18
16
14
16
16
16
12
16
14
14
WARNING:
THIS CHAINSAW IS FOR OUTDOOR USE ONLY. DO NOT EXPOSE TO RAIN OR USE IN
DAMP LOCATIONS.
WARNING: ALTHOUGH THIS TOOL IS DOUBLE INSULATED, THE EXTENSION
CORD AND RECEPTACLE MUST STILL BE GROUNDED WHILE IN USE TO PROTECT
THE OPERATOR FROM ELECTRIC SHOCK.
(See Figure 4.)
Fig. 4
100' (30.4 m)