Yardworks 054-5703-0 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 42

Yardworks 054-5703-0 Скачать руководство пользователя страница 14

ASSEMBLY

14

UNPACKING

This product has been shipped completely assembled.

• Carefully remove the product and any accessories from the box. Make sure that all items

listed in the packing list are included.

• Inspect the product carefully to make sure no breakage or damage occurred during

shipping.

• Do not discard the packing material until you have carefully inspected and satisfactorily

operated the product.

• If any parts are damaged or missing, please call 1-866-523-5218 for assistance.

PACKING LIST

Chainsaw

Scabbard

Owner's Manual

WARNING:

If any parts are damaged or missing, do not operate this product until the parts are

replaced. Failure to heed this warning could result in serious personal injury.

WARNING:

Do not connect to power supply until assembly is complete. Failure to comply could result in

accidental starting and possible serious personal injury.

WARNING:

Do not attempt to modify this product or create accessories not recommended for use with

this product. Any such alteration or modification is misuse, and could result in a hazardous

condition leading to possible serious personal injury.

«
...
12
13
14
15
16
...
»

Содержание 054-5703-0











































Отзывы:

Нет отзывов