+
2. Hold the lifting handle and slowly lower the beam. It will lock
automatically. Double check to make sure the beam bracket
is locked onto the beam.
�
Do not let the beam suddenly drop. Keep hands and
Lil
fmgers clear of pinch or crush points at all times.
Lifting Handle
Beam Lock Bracket
Figure Sb
MANUAL TUBE
1. Remove the cap from the manual tube. Align the holes in the
manual tube with the holes in the tow bar. Insert and tighten
bolts and washers. (See rQJure 9)
2. Reattach the cap.
LOG CRADLES
Figure9
M8X20
Cap
•
M8x20(x2)
Manual Tube
X2 ■
=Ii
1. Align the holes on the right log cradle to the inside and lower
holes on the beam mounts. Insert the M12x3S bolts, flat
washers, and nuts and securely tighten.
15
I Assembly
65916US25M104_GB.indd 15
2. Follow step 1 to assemble the left log cradle. (See
Figure
10)
Figure
10
M12X35
xa
►M
LOG TABLE (OPTIONAL)
Refer to
Figures
10 and 11 to install the work table. Remove
the bolts, flat washers, and nuts from the inside holes. Move
the log cradle from the incline position to the horizontal
position. Align the holes on the log cradle with the outside
holes on the beam mount. Reinstall the bolts, flat washers,
and nuts.
Place the work table over the holes in the log cradle and align
the 4 holes from the work table plate and log cradle. Insert
and tighten the M 10x2S bolts, spring washers, flat washers,
and nuts .
'!f
�M10x25(x4l
Work Table
Outside Holes
Log Cradle (Right)
Figure
11
M10X25
X4
1111
YU2566PM02-1703
2020/3/27 14:08:55
+
