Unlock Position
Lock Position
Mounting Slot
Plastic Screw
Head
M8×25
(×1)
3
5
2
1
4
Pin Lever
Bolt Hole
Limiter
Rubber Cap
Spring Washer
DEPTH STAKE
HEIGHT LIMITER
1. Hold the machine leaning forward.
(see
Figure 5a, Illustration 1
)
2. Pull the pin lever to unlock position.
(see
Figure 5a, Illustration 2
)
3. Insert the depth stake into the slot in the blade cover.
(see
Figure 5a, Illustration 3
)
4. Release the pin into the fourth hole of depth stake. At the same
time, switch the pin lever to the lock position.
(see
Figure 5a,
Illustration 4
)
5. Fasten the M8×25 bolt, washer and plastic screw head into
the first hole of depth stake. Hold the plastic screw head in
place with pliers while screwing the bolt in.
(see
Figure 5a,
Illustration 5
)
6. Adjust the depth stake to the desired depth of tilling. (See
Figure 5b
)
Screw the spring washer, limiter and rubber cap into the bolt hole
in the back of blade cover. Hold the bolt hole in place with 13mm
wrench while fastening the limiter bolt in with 10mm wrench. (See
Figure 6
)
M8 × 25
× 1
2
× 1
3
Figure 5a
Figure 5b
Figure 6
Limiter
Shallowest Tilling
Transport Position
Deepest Tilling
17
mm
18
mm
30
mm
13
mm
11
mm
12
mm
10
mm
17
mm
18
mm
30
mm
13
mm
11
mm
9
YT4565PM02 - 1704
|
Assembly
32850US25M102.indd 9
2017/3/27 10:22:01