YARDMAX YM0115 Скачать руководство пользователя страница 5

SAFETY

KNOW YOUR CONCRETE MIXER

Read this manual and all labels to understand your YARDMAX 
concrete mixer and its limitations and potential hazards.

DRUGS, ALCOHOL, AND MEDICATION

Do not operate your concrete mixer while under the influence of 

drugs, alcohol, or any medication that could affect your ability to 
use it properly.

AVOID DANGEROUS CONDITIONS

Secure your concrete mixer on level ground. Keep your work area 
clean and well lighted. Cluttered areas may cause injuries. Do 
not use your concrete mixer in wet or damp areas or expose it to 
rain. Do not use it in areas where fumes from paint, solvents, or 

flammable liquids pose a potential hazard.

To prevent the mixer from tipping over, only use or operate the 

mixer on solid, flat, level ground capable of supporting the weight 

of both the mixer and its load. Do not attempt to move the mixer 
when it is loaded and/orin operation. This mixer is intended for 
the production of concrete, mortar and plaster. It is not suitable 

for the mixing of flammable or explosive substances. Do not use 
it in areas where fumes from paint, solvents or flammable liquids 

pose a potential hazard.

INSPECT YOUR CONCRETE MIXER

Check your mixer before turning it on. Keep guards in place and 
in working order. Do not plug mixer with motor cover off. Check 
all bolts, nuts, and screws for tightness before each use, especially 
those securing guards and drive mechanisms. Vibration during 
mixing may cause these to loosen. Form a habit of checking to 
see that all the adjusting tools, shovels, hand trowels and other 

tools/equipments are removed from mixer area before turning 

it on. Replace damaged, missing or failed parts before using it. 
Warning labels carry important information. Replace any missing 
or damaged warning labels.

DRESS PROPERLY

Do not wear loose clothing, gloves, or jewelry (rings, watches) 
that can be caught in moving parts. Wear protective, non-
conductive gloves and non-skid footwear. Pull long hair back or 
wear a hat to prevent hair from getting caught in the machine.

PROTECT YOUR EYES

Always wear safety glasses. Concrete mixers can throw foreign 
objects into the eyes, causing permanent eye damage. Every 
day glasses do not have impact-resistant lenses and should not 
replace  safety glasses. Z87 rated glasses are recommended.

PROTECT YOUR BODY

Always stand behind the concrete mixer and stay alert.

KEEP VISITORS AND CHILDREN AWAY

Keep unauthorised persons away from the mixer. Do not allow 
children to handle or climb on or in the mixer.

EXTENSION CORDS

Improper use of extension cords can cause the motor to overheat. 
Your extension cord should be no longer than 30 feet and a 
minimum of 12 gauge with a 3-prong grounded plug.

Avoid  use  of  free  and  inadequately  insulated  connections. 

Connections must be made with protected material suitable for 
outdoor use. Make sure that any extension cord connections are 
dry and safe. Ensure that the extension cord is carefully laid out 

avoiding liquids, sharp edges and places where vehicles might 

run overit. Avoid allowing the extension cord to be trapped 
underneath the mixer. Unroll it fully or it will overheat and could 

catch fire.

AVOID ELECTRICAL SHOCK

Do not plug or unplug the motor while standing in or around 
damp or wet ground. Do not use the mixer in wet or damp areas 
or expose it to rain. Prevent body contact with grounded surfaces: 
pipes, radiators,ranges, and refrigerator enclosures. Make sure 

your fingers do not touch the plug’s metal prongs when plugging 

or unplugging the mixer.

Do not touch the electric wires inside the motor cover. For any 
service please contact YARDMAX or an authorized service 
center. Make sure your fingers do not touch the plug’s metal 
prongs when plugging or unplugging the concrete mixer.

DON'T OVERREACH

Keep proper footing and balance at all times when loading 
or unloading the mixer. never stand on mixer. Serious injury 
could occur if the mixer is tipped or if the moving parts are 
unintentionally contacted. Do not store anything above or near 
the mixer where anyone might stand on the mixer to reach them.

AVOID INJURY FROM ACCIDENTS

Keep hands out of the way of all moving parts. Do not place any 
part of your body or any tool - such as a shovel - in the drum 
during operation. When operating, do not pass hands through the 
clearance between frame and support arm, or through the space 
between the drum and the support arm.

PROTECT YOUR HANDS

Keep your hands away from all moving parts. Do not place any 

part of your body in the drum, or under the finger guard, at any 

time while the motor is on.

WARNING! Stay of clear of all moving parts!

4

Electric Concrete Mixer   

»   

Operator’s Manual

 

     

Safety    

|

74013US25M101.indd   4

2017/3/14   11:28:42

Содержание YM0115





















Отзывы: