M10 × 60
(×1)
Driving Wheel
Nut M10
(×2)
Track Protection Guard
M8 × 16
(×3)
Steering Wheel Axle
Steering Wheel
Adjusting Bolt
3. Remove the three M8×16 bolts and washers that fix the track
protection guard. (See
Figure 11b
)
4. Remove the two M10 nuts and washers from the side of track
protection guard. (See
Figure 11c
)
5. loosen the adjusting bolts and pull the steering wheel axle
toward the engine, then track will be loosen. (See
Figure 11d
)
Figure 11b
Figure 11c
Figure 11d
17
mm
18
mm
30
mm
13
mm
11
mm
17
mm
18
mm
30
mm
13
mm
11
mm
6. Remove the M10×60 bolt, washers and nut from the driving
wheel. (See
Figure 11e
)
When removing or installing the tracks, be careful not to
get your fingers caught between the track and pulley.
ENGINE MAINTENANCE
Refer to the Engine Manual included in your unit
for the information on engine maintenance. Your
engine manual provides detailed information and a
maintenance schedule for performing the tasks.
Figure 11e
Figure 11f
7. Pull out the whole track with driving wheel. (See
Figure 11f
)
24
mm
5
mm
8
mm
19
YD8105PM04 - 1804
|
Maintenance
