Remove tlie spark plug cap.
Clear away dirt aroimd tlie spark plug base.
Dismantle the spark plug witli a spark plug wrench.
1.
2.
3.
4.
5.
6.
7.
8.
In order to ensure the engine
normal running, gap of the spark
plug must be correct and no
deposit around the spark plug.
SPARK PLUG SERVICE
Don’t touch the muffler to
avoid burn in the engine
running or just stopping a moment.
WARNING
0.7-0.8mm
The spark plug must be
tightened securely, or it may
become very hot damage the engine.
Only use recommended spark plug or the equivalent.
Incorrect heat range of the spark plug may damage
the engine.
CAUTION
Visually check the spark plug. Clean with a steel brush. If the
insulator is damaged, replace the spark plug instead.
Measure the spark plug clearance with a feeler. The
clearance should be 0.7~0.8mm. If adjustment is necessary,
bend the side electrode carefully.
7RDYRLGFURVVWKUHDGLQJĆUVWVFUHZLQVSDUNSOXJE\KDQG
then tighten with a spark plug wrench to compress tlie
gasket.
If a new spark plug is used, please replace it with same spark
plug model as can as possible, and more twist 1/2 turns after
compressing the gasket.
If reinstalling tlie used spark plug, just more twist 1/8-1/4
turns.
STORAGE/ TRANSPORTING
Do not incline the engine so as to avoid fuel's spill in transporting.
Spilled fuel or fuel vapor may ignite to cause fire. If suspension
for a long time, storage should be as following:
U s i n g a g a rd e n h o s e o r
pressure washing equipment
can force water into the air cleaner or muffler
opening. Water in the air cleaner will soak the air
ĆOWHUDQGZDWHUWKDWSDVVHVWKURXJKWKHDLUĆOWHURU
PXIćHUFDQHQWHUWKHF\OLQGHUFDXVLQJGDPDJH
Water contacting a hot engine can cause damage. If
the engine has been running, allow it to cool for at
least half an hour before washing.
WARNING
The storage area is dry and free of dust.
Completely drain fuel out of tlie fuel tank and carburetor.
Replace engine oil.
Remove the spark plug. Fill about a spoon of fresh engine oil
onto the cylinder. Crank the engine up to distribute engine
oil evenly. Reinstall the spark plug.
Liglitly pull the recoil starter rope until tlie resistance is felt.
Close the choke to protect the dust from entering in.
Cover the engine to protect dust entering.
Fuel is extremely flammable
a n d e x p l o s i v e u n d e r
FHUWDLQFRQGLWLRQV.HHSVPRNHĆUHDQGVSDUNDZD\
from operating site.
WARNING
1.
3.
2.
4.
5.
6.
Proper storage preparation is essential for keeping your engine
trouble free and looking good. The following steps will help to
keep rust and corrosion from impairing your engine’s function
and appearance, and will make the engine easier to start after
storage.
If the engine has been running, allow it to cool for at least half an
hour before cleaning. Clean all exterior surfaces, touch up any
damaged paint, and coat other areas that may rust with a light
ĆOPRIRLO
STORAGE PREPARATION
CLEANING
11
| Maintenance &Storage/Transporting