
Figure 7b
Figure 7e
OPEN
OPEN
CLOSED
CLOSED
Recoil Starter - Pull the starter grip lightly until you feel
resistance, then pull briskly. Return the starter grip gently.
Prime Engine - To prime engine you should not press priming
pump more than three times.
Figure 7d
Figure 7c
Starter Grip
Notice:
Starting the engine, carefully note the following:
When using the machine in very low temperatures, a
warm up period of up to 30 seconds may be required
of the engine prior to operation. If inconsistent engine
speeds are experienced when choke lever is rotated OPEN
position:
1. Move choke lever to mid-point between OPEN
and CLOSE positions and allow engine to develop
additional operating heat.
2. After engine has warmed up, move choke lever to
OPEN position.
3. If the choke lever has been
moved to the “CLOSE” position
to start the engine, gradually
move it to the “OPEN” position
as the engine warms up.
OPEN
CLOSED
STOPPING THE ENGINE
To stop the engine in an emergency, simply turn the engine switch
to the “OFF” position. Under normal conditions, use the following
procedure. Pull out the engine switch.
Figure 8
The Engine Switch Key
10
Gasoline Engine
»
Operator’s Manual
Operation
|