Yardline BERKDALE 14' x 8', Руководство пользователя

Страница: 39 / 80

37
RAFTER ASSEMBLY
PARTS REQUIRED:
1/4" (1,9 cm)
GAP
1/4" (1,9 cm)
GAP
Fig. B
Fig. C
Fig. A
Fig. D
2" (5,1 cm)
x168
3" (7,6 cm)
x2
You will build 8 RAFTERS. (2) RAFTERS will have ONE gusset. (6) RAFTERS will have TWO gussets.
x14
x16
2 x 4 x 56-15/16" (2,5 x 10,26 x 144,6 cm)
3
4
2
1
BEGIN
Measure and mark the floor at 96" from the corner (Fig. A) .
Attach GAA at mark using (2) 3" screws.
Place (2) rafters in the corners with ends touching at peak (Fig. A) .
Place gusset with 1/4" offset on top of rafters (Fig. B) . Apply glue where gusset contacts rafter (Fig. D) .
Nail gusset to rafters using (12) 2" nails in pattern shown (Fig. B) .
On TWO rafters install one gusset. (Fig. C) .
On SIX rafters flip over assembled rafter and attach a SECOND gusset (Fig. D) .
Make a jig so rafters will all have the same measurement using the shed floor
and 3/4" gauge block (GAA) .
3/4"
GAUGE BLOCK
GAA
96"
(243,8 cm)
You have finished building your rafters.
Remove gauge block (GAA) .
FINISH
5
Flush
Flush
GAA
Gauge Block
Flush
(2) 3" (7,6 cm)
Screws
Back Wall
Glue
Glue
SDB