Yardistry YM12973, Инструкция по установке и эксплуатации

Страница: 15 / 38

15
support@yardistrystructures.com
Step 13 - Position Center Uprights 35-9/16" [1062mm] from post.
Measure from inside of post to inside of Upright. Fasten to front
and back beam with (2) #8 x 1-1/2 Wood Screws.
(2) 881-Center Upright
(4) Wood Screw-#8 x 1-1/2
Step 13 - Position Center Uprights 35-9/16" [1062mm] from post.
Measure from inside of post to inside of Upright. Fasten to front
and back beam with (2) #8 x 1-1/2 Wood Screws.
(2) 881-Center Upright
(4) Wood Screw-#8 x 1-1/2
Step 6: Attach Uprights
F6.1
F6.2
Hardware Wood Parts
2 x (881) Centre Gable Upright
A: From inside the frame measure 35-9/16” (90.3 cm) along one (796) Front Back Beam from inside the Post
Assembly then place one (881) Centre Gable Upright tight to top of (796) Front Back Beam, make sure it is
square then attach with two #8 x 1-1/2” Wood Screws. Repeat for other (796) Front Back Beam. (F6.1and F6.2)
4 x #8 x 1-1/2” Wood Screw
#8 x 1-1/2”
Wood Screw
Note: The Gable Uprights
may have to be adjusted
when roof is installed.
(796) Front
Back Beam
(796) Front
Back Beam
Post
Assembly
Post
Assembly
(796) Front
Back Beam
(881) Centre
Gable Upright
35-9/16”
(90.3 cm)
(881) Centre
Gable Upright
Tight