12
Step 5 - Attach Panel Clips to Side Posts
2x
4x4 Posts
6x - Panel Clips
12x
#8 x 1 1/2” Wood Screw
P
S7
1. On a flat surface place P- 4x4 Post on its side and position Panel Clips in
locations indicated in Figures 1 and 1A.
Ensure Panel Clips are oriented
as shown in Diagrams! Use posts A and D from previous step.
2. Panel Clips should be placed in the centre of the post or the leading edge
of the clip should be 1 3/8” or 3.5cm away from the side of the post as
shown in Fig. 2.
3. With Panel Clips in place, mark screw holes with a pencil and pre-drill
holes with a 1/8” drill bit. (Not provided)
4. Secure Panel Clips in locations indicated in figure 1 and 1A with S7- #8 x 1
1/2” wood screws.
5. Repeat for each post configuration
.
Top View
Left Side View
E
Top View
RIght Side View
D
F
A
Use posts A and D from
previous step!
1 3/8”
Fig. 2
Pre-drill holes and secure with S7- #8 x
1 1/2” Wood Screws
(3.5cm)
56 1/4”
40”
