Parts List
Tools Required Fo
r Th
e Job
5/32”
Hex Key
(included)
*NO
TE: Thi
s Hex Key is used
to tighten all the
fasteners
used in the assembly process.
seat
backrest
hardware pack
2 Armrests
2 chain packs
4
armrest
supports
1/2" wrench
Страница 1: ...ASSEMBLY MANUAL WOOD ADIRONDACK SWING ...
Страница 2: ...ools Required For The Job 5 32 Hex Key included NOTE This Hex Key is used to tighten all the fasteners used in the assembly process seat backrest hardware pack 2 Armrests 2 chain packs 4 armrest supports 1 2 wrench ...
Страница 3: ...a 3 1 2 lag into pre drilled hole Then align with pilot hole on backrest Tighten after both sides are started Step 2 Step 4 Step 3 Step 1 lock nut washers Fasten armrest to back support On a 3 lag place a washer then the last link on the chain pack Thread through pre drilled hole on armrest into pilot hole on backrest Overtightening can strip out the hole If this happens use a 4 lag not provided R...
Страница 4: ... backrest using screw provided Step 6 Step 8 Step 7 Step 5 Congratulations Your swing assembly is now complete Your swing should appear like this when completed Fasten to quick link on the eye bolt Use the other end to hang your swing at the desired location On most applications the angle of the swing will be correct but it can be adjusted using either quick link Repeat on opposite side ...
