(2) Left Side End Boards
with Notches
(2) Angled End Boards
Step 2: Make sure all end boards are tight
together and fasten bottom trim board with 5
pre-drilled holes and top trim board with 2
pre-drilled holes
with 1 ¼”
screws as shown.
Repeat Step 1 & step 2. There
should be 2 panels as shown here.
A
ng
le
d
End
B
o
ar
d
Vertical Garden Bed Assembly Manual
(2) Right Side End Boards
with Notches
(14) Shelf Boards
(2) Top Side Boards
(1)
Small Bottom Shelf Board
(Marked)
(1)
Big Bottom Shelf Board
(Marked)
(2) Bottom Shelf Blocks with 3
pre-drilled holes.
(2) Bottom Trim Boards
with 5 Pre-drilled holes
(2) Top Trim Boards
with 2 Pre-drilled Holes
(2) Top Trim Boards
with 4 Predrilled Holes
(34
) 2”
Screws
(28
) 1 ¼”
Screws
(1)
#2 Square Drive Bit
(Included)
Screw Gun OR Screw Driver
(Not Included)
Step 1: Make sure top notches are on the
outside and shelf notches angle down
into the center as seen in Step 5. Fasten
Angled End Board to Left Side End Board
with (1) 2”
Screw.
Rig
h
t
Side E
n
d
Bo
ar
d
Questions? Issues with Damaged or
Missing Parts?
In order to best assist you, please contact
YardCraft directly, NOT a third part
retailer, with any questions regarding our
products, damages, or replacement parts.
This will help you get what you need as
quickly as possible! Call us at 866-210-
9273 or Email us at [email protected]!
