Yardbeast YB2090, Руководство пользователя

Страница: 10 / 27

Assemble the feed chute onto the the
chipper opening -as shown on the FIgure
below- by screwing the 9 bolts required.
Start by screwing the first two top bolts with
a nut so the hopper doesn't come off while
puttin in place the remanining bolts.
a.9 Hex Bolts 5/16" x 1"
b.9 Hex Nuts 5/16"
c.9 Flat washer 5/16"
Setting up your Wood Chipper
Operation
Fuel & Oil
Read and follow all instructions in the
manual for more information on
Once you have finished assembling your
wood chipper, you must prepare
engine for the first start. Locate the
in the top of the engine and remove
should
fill the tank engine
approximately 7 liters of clean, fresh fuel
Assemble the feed chute onto the the
as shown on the FIgure
by screwing the 9 bolts required.
Start by screwing the first two top bolts with
a nut so the hopper doesn't come off while
lace the remanining bolts.
Setting up your Wood Chipper for
all instructions in the engine
this matter.
assembling your
prepare your
the fuel cap
and remove it. You
engine with
, fresh fuel .
WARNING
Use extreme
handling fuel.
flammable and the vapors
explosive. Never
machine indoors or while
running or hot. Extinguish cigarettes
pipes and other sources of ignitio
When putting oil into the engine, it is better
to use a funnel to prevent spills on the
machine. The engine uses approximately
liters of oil. Engine oil is a fluid with significant
viscosity, it takes a bit of time to settle
important to always wait some time before
measuring the oil level with the dipstick
Please use the following oil type according
to your outdoor operation temperature
range.
Change the oil at the first 20 hours of
operation, then change the oil every 100
hours of operation.
10
caution when
Fuel is highly
flammable and the vapors are
Never refuel the
or while the engine is
Extinguish cigarettes, cigars,
other sources of ignition.
When putting oil into the engine, it is better
to use a funnel to prevent spills on the
machine. The engine uses approximately 1.2
of oil. Engine oil is a fluid with significant
viscosity, it takes a bit of time to settle, it is
important to always wait some time before
measuring the oil level with the dipstick
Please use the following oil type according
to your outdoor operation temperature
Change the oil at the first 20 hours of
change the oil every 100