We recommend checking our online blog for more service articles at
www.yardbeast.com/read-blog
Storage of your unit.
1. Care must be taken to prevent rust on the surfaces. Cover all equipment with a
light coat of oil and use an oil-soaked cloth for cleaning all equipment. Then
cover the chipper with a big plastic bag to prevent the environmental conditions
from harming the equipment on the long run.
2. Follow the off-season storage recommendations for the engine.
3. Store equipment in a clean, dry area. Never store the machine or fuel container
where there is an enclosed space, fire presence, spark or pilot light such as water
heaters, furnaces, clothes dryers, etc.
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Engine is not
starting.
1. Spark plug is disconnected
2. Fuel tank is empty
3. Fuel ON/OFF Switch is OFF
4. Air filter is clogged
5. Engine is cold, and choke
lever is on the open position
(I)
6. Carburetor is clogged
7. Low oil (Oil sensor is tripped)
1. Reconnect spark plug.
2. Fill the tank with fresh
fuel.
3. Turn ON Fuel Switch
4. Clean Air Filter or replace.
5. Move the choke lever to
the CHOKE position.
6. Contact authorized
Service center.
7. Refill with the correct
amount of oil.
Low Chipping
Performance
1. Blade edge is dull
2. Separation between anvil and
blade is not the best.
3. Incorrect chipper RPM
4. Incorrect belt tension/ worn
belt.
5. Worn clutch
1. Resharpen or replace the
blade.
2. You may adjust to
standard separation to
0.137-inches.
3. The chipper should run at
full engine speed.
4. Adjust tension, if the belt
is showing signs of wear,
replace.
5. Replace clutch.
31
Содержание 3514
Страница 19: ...Chipper Features and Controls 19...
