Yard Works 60-1769-2 Скачать руководство пользователя страница 8

8

Figure 4 

Remove the hairpin clips from the outer hole in the 
weld pins on the handle mounting brackets.

Using a pair of pliers, squeeze one leg of the lower 
handle against the handle mounting bracket. Insert 
the hairpin clip into the inner hole on the weld pin. 
Repeat on the other side. Refer to Figure 5.

Make certain all nuts and bolts are tightened 
securely. 

Figure 5

Assembling the Grass Catcher

NOTE:  Before assembling, make sure that the grass
bag is turned right side out with the warning label on the
outside. Also the black plastic side is the bottom of the
bag.

Insert the front frame into the rear frame as far as it 
will go. 

Place frame assembly inside the bag. 

Slip the plastic channel of the bag over the frame 
(adjacent to the handle of the grass catcher) as 
shown in Figure 6. Make sure that the handle of the 
grass catcher protrudes out of the notch in the 
plastic channel on bag.

Insert the two hooks on both sides of the frame 
through the openings on both sides of the bag.

Figure 6

Secure bag to the frame by working the plastic 
channels on bag over the frame on the other sides 
as shown in Figure 6.

NOTE: All of the plastic channels except the center top
of the bag attach from the outside of the bag. The
center top of the bag attaches from the inside of bag.

WARNING: 

Never operate the mower without

the proper trail shield, discharge cover, grass
catcher, blade/motor control or other safety
protective devices in place and working. Never
operate the mower with damaged safety
devices. Failure to do so can result in personal
injury.

Attaching The Grass Catcher

Lift the rear discharge door on the mower and 
remove the mulching baffle. See Figure 7.

Figure 7

Lower

 

Handle

Upper Handle

Insulator

Hand Knob

(Align marks here)

Lower Handle

Outer Hole

Inner Hole

Hairpin Clip

Handle Mounting

Bracket

1. Slide front frame 

into rear frame

Front Frame

 

Rear Frame

2. Place frame 

inside bag

Handle

Hook

Hook

Notch

4. Slip plastic channel 

over frame

3. Slip handle 

out of notch

Mulching Baffle

Rear Discharge Door 

Содержание 60-1769-2




















Отзывы: