10
damaged.
Fig.8
LED light
WARNING!
Disconnect the extension cord before
performing any maintenance task.
If the extension cord is plugged into the snow
shovel, someone could accidentally turn on the
unit while you are performing maintenance on it,
which could result in serious personal injury.
Replacing the Paddle
WARNING!
Disconnect the power supply to the
electric snow shovel before beginning work.
1. Use a wrench to remove the bolt and the
washer on the right side of the housing
(Fig. 9).
Fig.9
Wrench
Bolt
2. Using a cross-head screwdriver,
disassemble the left side cover by
removing the seven (7) screws (Fig. 10).
Fig.10
3. Remove the tensioner. Unscrew the three
(3) screws securing the big pulley plate,
then remove the plate and pulley assembly
(Fig. 11).
Fig.11
Tensioner
Big pulley plate
4. Remove the old paddle from the housing
(Fig. 12).
5. To install the new paddle, place the washer
(A) back onto the bolt (removed in step
1) and insert the bolt so that it protrudes
slightly into the housing of the unit. Thread
the nut and then the other washer (B) onto
the bolt. Fit the new paddles onto the end
of bolt and tighten the bolt (Fig. 13).
Fig. 13
Bolt
Nut
Washer (A)
Washer (B)
6. Reinstall the big pulley plate and align it
with the other end of the paddles. After
fitting the paddles into position, secure the
big pulley plate with the three (3) screws
(Fig. 14).
Fig. 14
Fig. 12