16
OPERATION
– Check it for visual defects.
– Check that all parts of the machine have been securely fitted.
– Check if the water connector and the high-pressure pipes are tight.
Starting and stopping
Note:
put the high pressure washer on a smooth ground. Stand in a secure and stable position.
Starting:
1. Open the water inlet valve
2. Unlock the safety trigger on the spray gun, and press the trigger until there is a steady stream of water
and no air remains in the system. This will make it easier to pull start the engine. Release the trigger.
3. Engage the safety latch to the spray gun trigger.(Fig 6)
4. Start the engine according to following description and operating information.
a. PARTS DESCRIPTION
b. PRE-OPERATE INSPECTION
1. ENGINE OIL
Use 4-stroke engine oil, API service classification SE class or equivalent. Check the API service
label on the oil container to be sure it includes the letters SE class or equivalent.
SAE 10W-30 is recommended for general use. Other viscosities shown in the chart may be used when the
average temperature in your area is within the indicated range.
Содержание YF3003
Страница 3: ...3 Fig 1 Fig 2 Fig 4 Fig 3 Fig 5 Fig 5 ...
Страница 4: ...4 Fig 6 Fig 8 Fig 7 Fig 9 Fig 10 ...
Страница 5: ...5 Fig 11 ...
