4
5
INTENDED USE
The The VITA screwdriver and attachment bits are intended for screwing in and
loosening screws.
Any use beyond these parameters (different media, applying force) or any changes
can lead to serious risks and is regarded as misuse that is contrary to the intended
purpose.
GENERAL SAFETY WARNINGS
WARNING
Read all the safety notes, instructions, illustrations and
technical details supplied with this power tool. Failure to
follow the safety notices and instructions may result in an
electric shock, fire and/or severe injury.
Keep all safety notes and instructions for future reference.
The term “power tool” used in the safety instructions
refers to mains-operated power tools (corded) and
battery-powered power tools (cordless).
Work place safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
GENERAL SAFETY WARNINGS
