12
13
Switch ON the device
- Press the button for 3s to switch on the device, DC output will be actived accordingly.
- When the device is powered ON, all the DC ports are ready to use.
Active the AC function
- Press the button, the "AC" mark will light on in the display which means the 2 AC ports are ready to use.
To obtain the best life from the battery
1. Never allow the device to completely discharge before recharging. The device should be placed on the charger whenever the battery pack
is noticeably running down or the tool no longer performs a task it previously performed.
2. Avoid conducting short charges. Make sure that the device is fully charged each time by allowing the adaptor to complete its full charging
cycle.
3. Avoid allowing loose items like screws or nails etc. to be stored with device as these or similar items can short the device and cause a fire
or explosion.
4. Always unplug the device when not in use and store in a dry and secure place.
5. Avoid charging or storing your device in temperatures below 5 °C and above 45 °C.
6. After use, allow the device to cool down for approximately 30 minutes before attempting to recharge.
100%
HOURS
50
000
w
DC USB-A
OUTPUT
100%
HOURS
50HZ
50
000
w
DC USB-A
AC
OUTPUT
3s
Car charger
12V 120 W
Type C
18 W
Type C
100 W
USB A
18 W
USB A
18 W
USB A
18 W
GB
GB
