22
MAINTENANCE AND STORAGE
Cleaning and storage
WARNING!
Risk of damage!
-
Do not spray the device with water.
-
Always check the device for obvious faults and defects before use; have them repaired if
necessary and defective parts replaced.
Cleaning
Risk of damage!
Improper handling of the device can lead to damage the device.
-
Do not use any aggressive cleaning agents, brushes with metal or nylon bristles, or
sharp or metallic cleaning objects such as knives, hard spatulas and the like. These can
damage the surfaces.
Cleaning after dry vacuuming
-
Remove the battery.
-
Remove all accessories and the suction hose 16 (see chapter Removing the suction
hose / accessories).
-
Detach the motor head 2 (see chapter Detaching the motor head).
-
Knock the dust out of the HEPA filter cartridge 20.
-
Clean the HEPA filter cartridge 20 with a paint brush or a brush.
-
If a fine dust bag is used, remove it (see chapter Removing the fine dust bag).
-
Empty the stainless steel container 9.
-
Clean the motor head 2, the stainless steel container 9, the accessories and the suction
hose 16 with a slightly damp cloth.
-
Insert a filter (see chapter Filters).
-
Assemble the motor head 2 (see chapter Assembling the motor head).
Cleaning after wet vacuuming
-
Remove the battery.
-
Remove all accessories and the suction hose 16 (see chapter Removing the suction
hose / accessories).
-
Dismantle the motor head 2 (see chapter Dismantling the motor head).
-
Remove the foam filter 21.
-
Clean the foam filter 21 with lukewarm water and soap.
-
Position a collecting container of sufficient size under the drain screw.
-
Open the drain screw 11.
-
Empty the stainless steel container 9.
-
Rinse the stainless steel container 9, the accessories and the suction hose 16 with a