16
Assembling the Flower protection
As shown in
Fig 4
1.
Push the flower protection into motor housing, it provides protection for flowers and gar
-
den furniture.
2. To remove it, pull it out.
Assembling Safety guard
As shown in
Fig 5&6
WARNING!
The guard must be properly installed. The guard provides partial
protection from the risk of thrown objects to the operator and others.
NOTE!
If guard is not properly installed, damage to unit (including motor failure) will be
result.
1. Push the safety guard into the slot which located on the motor housing until two clips
locked in position.
2. To remove it assistant is preferred to press two clips down by using foreign tools ( not
supplied) (e.g. slotted screwdriver) which can reach the clips through the small opening
on the motor housing, and pull the safety guard out at the same time.
Fig 4
Flower protection
Push
Push
Safety guard
Fig 5
Fig 6
Safety guard
Small
opening
ASSEMBLY
Содержание LT G33A
Страница 2: ......
