Yard force LM C37B, Оригинальное руководство пользователя, Страница: 28 / 31

28
TROUBLESHOOTING
WARNING: Before performing any repair work, always ensure that the battery pack
has been removed.
WARNING:
Always wear heavy duty gloves when adjusting or cleaning, especially
when handling sharp objects.
Fault/malfunction Cause Remedy
Mower fails to start
Battery is not correctly inserted. Remove the battery and reinsert.
Mower standing in high grass.
Start motor on shorter grass or
already mowed area, change cutting
height if necessary.
The mower deck is clogged.
Clean the underside of the deck so
that the blade can move freely.
Battery has no power. Check and recharge battery.
Mower stops working
/loses power
Cutting height is incorrect. Adjust the cutting height.
Cutting blade is worn or
damaged. Replace with new blade from dealer
service centre.
Battery performance
decreasing. Check the battery performance and
charge it if necessary.
Grass bag is not filled
sufficiently
Cutting height is too Low.
Adjust and increase cutting height.
The lawn / grass is wet.
Allow the lawn to dry.
Underside of the mower deck
is clogged.
Clean the underside of the mower
deck.
Cutting blade is worn or dam-
aged.
Replace it by contacting the custom-
er service center.
Mower vibrating at
higher speed
Cutting blade is unbalanced.
Balance the blade by grinding each
cutting edge until equal.
Blade is Loosened /incorrectly
fitted.
Tighten the blade bolt.
Mower cuts unevenly The blade is damaged
Blade is assembled incorrectly.
Sharpen the blade or replace
Re-assemble blade correctly.