22
23
Using the reciprocating saw
1.
Remove the equipped blade as previous
ly
described
2.
Hold down the left button, and then forced down can remove the reciprocating saw
blade
3.
Install the blade cover following the steps as shown in the picture.
- make sure the hook insert chassis.
- According to the position the direction of the reciprocating saw blade assembly down
by force.
Assembly and disassembly the battery pack
1.
Always release the On/Off switch before insertion or removal of the battery pack.
2.
To remove the battery pack, withdraw it from the tool while pressing the spring buttons 6
on both sides of the cartridge.
3.
To insert the battery pack, align the tongue on the battery cartridge with the groove in
the housing and slip it into place. Always insert it all the way until it locks in place with a
little click. If not, it may accidentally fall out of the tool, causing injury to you or someone
around you.
NOTE:
One Battery pack has been assemblied on the tools in original packaging.
NOTE:
Do not use force when inserting the battery pack. If the cartridge does not slide in
easily, it is not being inserted correctly.
Operating your tools
Cutting without swivel handle:
Warning! Never remove or bridge the switching devices.
The starting lockout prevents your tools from being switched on unintentionally.
OPERATION
To switch on:
1. Push lock-off button forward and depress the switch trigger.
2. Release the lock-off button again.
To switch off:
Release the on/off switch.
Cutting with swivel handle:
Fitting/removing the telescopic swivel handle
Fitting the telescopic swivel handle assembly:
1.
Take
out the battery pack
2.
Guide the swivel handle assembly into the handle holder until the lock engages.
NOTE:
The starting lockout and ON button on the tools no longer function when the swivel
handle is mounted.
Removing the telescopic swivel handle assembly:
Press the release button and pull out the swivel handle assembly.
Fitting/removing the wheels assembly
Fitting the wheels:
Push the wheel assembly upward into the grass shear until both catches click into suitable
place.
Removing the wheels:
Pull the wheel assembly downwards and remove.
WARNING:
Do not turn on the switch when you fit or remove the wheels assembly. This can
cause a serious injury.
OPERATION
1
2