Yard force LB C20, Оригинальное руководство пользователя

Страница: 5 / 13

8 9
• Make sure to always wear the required personal
protective equipment.
• Exercise caution and only work when in good condition:
- if you are tired or ill.
- if you have ingested alcohol, medication or illegal drugs,
do not use the device, as you are not in a condition to
use it safely.
• This product is not intended to be used by persons
(including children) who are limited in their physical,
sensory or mental capacities or who lack experience and/
or knowledge of the product, unless they are supervised
or have been instructed on how to use the product by a
person responsible for their safety.
• Ensure that children are not able to play with the device.
• Always comply with all applicable domestic and
international safety, health, and working regulations.
Risks caused by vibrations
CAUTION! Risk of injury due to vibrations!
Vibrations may, in particular for persons with circulation
problems, cause damage to blood vessels and/or nerves.
If you notice any of the following symptoms, stop working
immediately and consult a doctor: Numbness of body
parts, loss of sense of feeling, itching, pins and needles,
pain, changes in skin colour.
The vibration values specified in the technical data
represent the main uses of the device. The actual existing
vibrations during use may deviate from these as a result
of the following factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
GENERAL SAFETY WARNINGS
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by following the
tips below:
– Maintain the device in accordance with the instructions
in the operating instructions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and your hands in
particular, are kept warm.
– Take regular breaks and move your hands at the same
time to promote circulation.
Electrical safety
• The device may only be connected to a socket that is
correctly installed and grounded.
• The fuse must be a residual current circuitbreaker with
a measured residual current of no more than 30 mA.
• Make sure that the power supply corresponds with
the connection specifications of the device before it is
connected.
• The tool may only be used within the specified
limitations for voltage and power (see type plate).
• Do not touch the mains plug with wet hands! Always
pull out the mains plug at the socket and not by the
cable.
• Do not bend, crush, pull or drive over the power cable,
protect from sharp edges, oil and heat.
• Do not lift the device using the cable or use the cable
for purposes other than intended.
• Check the plug and cable before each use.
• If the power cable is damaged immediately disconnect
the plug. Never use the device if the power cable is
GENERAL SAFETY WARNINGS