20
MAINTENANCE AND STORAGE
-
Damage to the device, such as broken housing parts or worn collecting bag.
If you detect any defects, contact customer service or a specialist workshop. Do not operate
the device with a detected defect.
Storage
NOTE:
Improper storage of the device can result in damage.
-
Let the device dry before storing it. Residual moisture and cuttings remaining in the
device can lead to mould formation.
Optionally, the handle can be folded in to save space during storage or transport.
Transport instructions
-
Only lift the device by the carry handle.
-
Exclusively transport the device in normal position; prevent tilting while transporting.
-
When transporting the device in vehicles, the device must be secured in accordance with
the applicable regulations (load securing).
Replacing the blades
WARNING: Always wear heavy duty gloves when handling the blade as this can
cause injuries.
1. Loosen the bolt, turning anticlockwise using a suitable wrench and remove it together
with the cutting device.
2. Replace the cutting blade with a new one of the same type.
3. Reattach the cutting blade onto the spindle, pay attention to its correct alignment.
Ensure that you can see the symbol A on the blade. Tighten the bolt clockwise with
16Nm min., 20Nm max. to ensure the safe operation of your product.
4. Replace this cutting blade after 50 hours mowing or 2 years which ever is sooner
regardless of condition. If the cutting blade is cracked or damaged, immediately replace
it with a new one.
5. Lubricate the cutting blade after each use to prolong the life span of the cutting device
and product. Apply light machine oil along the edge of the cutting blade.
Содержание EM N34B
Страница 2: ...2 V1 0...
Страница 3: ...3 A B 5 1 2 7 8 9 10 3 4 a b c d j i e f g h 6...
Страница 4: ...4 C H I J D 5 6 E F G 1 2...
Страница 5: ...5 K M L 1 1 2 2...