background image

 

 

 

 

MAINTENANCE 

 

After each use clean material out of hopper.

 

Rinse/dry inside and outside of the spreader after each use.

 

Before operating make sure the tires have the RECOMMENDED 

 

Periodically check all fasteners for tightness.

 

Annually clean and lightly lubricate parts.

 

Use a glossy enamel spray pain

 

Never exceed load capacity rating of

 

IMPORTANT: 

If a part needs replacement, only use parts that meet the manufacturer

that do not meet specifications may result in a safety hazard or poor operations
 

STORAGE 

 

Never allow material to remain in the hopper for extended periods of time.

 

Before storing make sure the spreader is clean and dry for years of trouble free service.

 

Store indoors or protected area 

 

ALWAYS 

maintain the proper tire pressure.   

injury may result.   

ALWAYS

 keep the tires at 

 

Maintenance

 

7

material out of hopper. 

Rinse/dry inside and outside of the spreader after each use. 

Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE

fasteners for tightness. 

Annually clean and lightly lubricate parts. 

spray paint to touch up scratched or worn painted metal surfaces.

Never exceed load capacity rating of 125lbs it will damage the spreader. 

If a part needs replacement, only use parts that meet the manufacturer’s specifications. Replacement parts 

not meet specifications may result in a safety hazard or poor operations. 

Never allow material to remain in the hopper for extended periods of time. 

Before storing make sure the spreader is clean and dry for years of trouble free service.

or protected area during severe weather and winter months. 

WARNING 

maintain the proper tire pressure.   

DO NOT

 over or under inflate the tires as serious 

keep the tires at 

25PSI.

 

 

 

 

 

 

 

 

 

 

Maintenance and Storage 

TIRE PRESSURE. 

t to touch up scratched or worn painted metal surfaces. 

s specifications. Replacement parts 

Before storing make sure the spreader is clean and dry for years of trouble free service. 

 

over or under inflate the tires as serious 

Содержание SP31574











Отзывы: